manualshive.com logo in svg

Aritech FP2000, Reference Manual

Share
Download
Aritech FP2000 Reference Manual Download Page 71

Set date and time

(SET TIMES MENU, 1, 

)

SET DATE AND TIME         Thu 07/12/00 10:39:52

Current Date

:07/12/00

(dd/mm/yy)

Current Time

:10:39:52

(hh/mm/ss)

Summer Time

:00/00 00/00

(dd/mm)

Advance

:0h
0. . 9,

^V,

<>,

E,

     X

Alarms: 0

Faults: 1

Cond.: 0

P: 1

   SDZ

 Return to Set Times Menu

Page 68

 

 

Select item to be changed

 

 or 0..9 change the data

 

Confirm change

The fire panel date and time is set with this menu. Time is in 24hr format (00h00-23h59)

The date and time is used for event reporting, switching of selected zones on/off and
day/night, and is also used as an input for logic operations.

The date/time change will be logged into the event buffer as the following entries:
Old Time
New Time

The summer time and advance are used where summer and winter times differ. The start
and end dates (day and month) of summer and the advance time can be set.

Executed at 03h00.

Summary of Contents for FP2000


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands