manualshive.com logo in svg

Aritech FP2000, Reference Manual

Share
Download
Aritech FP2000 Reference Manual Download Page 77

Day mode times

(SET TIMES MENU, 7, 

)

DAY MODE                           Thu 07/12/00 10:39:52

Monday

:08:00

Friday

:08:00

Tuesday

:08:00

Saturday

:08:00

Wednesday

:08:00

Sunday

:08:00

Thursday

:08:00

Lnk

:none

0. . 9,

^V,

<>,

E,

     X

Alarms: 0

Faults: 0

Cond.: 0

P: 1

   SDZ

 Return to Set Times Menu

Page 68

 

 

Select item to be changed

 

 or 0..9 change data in item (Unlock memory!)

 

Confirm change

*See also Night Mode Times, Page 76

Zones that are 

enabled

 for Day/Night operation (

see Page 96 )

 will be switched to DAY

Mode at the times indicated, provided Link is switched to None. A separate time for each
day of the week is allowed. A time setting of 00h00 causes no action.

Link: If Link is switched to Fire Brigade, the Day Mode times are set to 00h00 and the
times set in the Fire Brigade Off Times 

(Page 71)

 is used, if the Link is set to external

(EXT.), the Day Mode Times are controlled by the Day Mode Output. Link must be set to
None in order to use the Day Mode Times.

Day Mode uses the Day level alarm threshold set in the Device Setup Menus.

Summary of Contents for FP2000


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands