manualshive.com logo in svg

Aritech FP2000, Reference Manual

Share
Download
Aritech FP2000 Reference Manual Download Page 78

Night mode times

(SET TIMES MENU, 8, 

)

NIGHT MODE                       Thu 07/12/00 10:39:52

Monday

:18:00

Friday

:18:00

Tuesday

:18:00

Saturday

:18:00

Wednesday

:18:00

Sunday

:18:00

Thursday

:18:00

0. . 9,

^V,

<>,

E,

     X

Alarms: 0

Faults: 0

Cond.: 0

P: 1

   SDZ

 Return to Set Times Menu

Page 68

 

 

Select item to be changed

 

or 0..9 change data in item (Unlock memory!)

 

Confirm change

*See also Day Mode Times, Page 75

Zones that are enabled for Day/Night operation (

see Page 96)

 will be switched to NIGHT

mode (more sensitive) at the times set. Times can be set for each day of the week.

A setting of 00h00 causes no action.

The Night mode alarm threshold is one less than the Day Level set in the Device Setup
Menus, except if the Day Level is set to 1 (one).

Summary of Contents for FP2000


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands