manualshive.com logo in svg

Aritech FP2000, Reference Manual

Share
Download
Aritech FP2000 Reference Manual Download Page 201

A

PPENDIX 

A

FP2000 panel menus

The following table gives the field numbers (access field) of the FP2000 Panel's menus.
The table also shows what FP2000 Panel configuration is required for a specific menu to
exist.

Description

Field Number or Access Field:

This is a word value (two bytes) that is used to distinguish between the different menus.
This is also the value that is used by FP2000 Communication Format message number
16 to change or read the access level of a specific menu remotely.

The field numbers in the table is intended to show the menu hierarchy.

Existence Option:

The existence of the different menus for four FP2000 Panel configurations is shown. The
configurations are:

•

 Absence of Field Loops

•

 Local Repeater

•

 Global Repeater

•

 Panel

-

All the menus exist for a standard FP2000 Panel (the "Panel" configuration above).

Summary of Contents for FP2000


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands