manualshive.com logo in svg

Aritech FP2000, Reference Manual

Share
Download
Aritech FP2000 Reference Manual Download Page 63

Field access

(ACCESS MENU, 2, 

)

FIELD ACCESS

Field number

:0

Access Level

:1

0. . 9,

^V,

<>,

E,

     X

Alarms: 0

Faults: 1

Cond.: 0

P: 1

   SDZ

 Return to Access Menu

Page 59

 

 

Select item to be changed

 

 0..9 change data in item (Unlock memory!)

 

Confirm entry

*See also Page 60

Each menu can be assigned an access level: 1-Low level; 2-High level. Entry codes that
have an access level of 1 cannot use any menu that has an access level of 2. Menus that
are set to access level 1 can be used by all entry codes.

The default of all menus is 1 

except

 for this menu (Field Access), Set Times and

Allocation. Thus, as default, an access code of level 2 is required to change the level of
any menu. (The access levels of the mentioned menus can be changed to 1).

A field number defines each menu of the FP2000. (

*Refer to Appendix A for the field

number of each menu.

 )

The access level is set by first entering the field access number of the menu, and then
changing the access level number.

Summary of Contents for FP2000


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands