manualshive.com logo in svg

Aritech FP2000, Reference Manual

Share
Download
Aritech FP2000 Reference Manual Download Page 73

Fire brigade delay off times

(SET TIMES MENU, 3, 

)

FBRIG DELAY OFF                 Thu 07/12/00 10:39:52

Monday

:18:00

Friday

:18:00

Tuesday

:18:00

Saturday

:18:00

Wednesday

:18:00

Sunday

:18:00

Thursday

:18:00

0. . 9,

^V,

<>,

E,

     X

Alarms: 0

Faults: 0

Cond.: 0

P: 1

   SDZ

 Return to Set Times Menu

Page 68

 

 Select item to be changed

 

 or 0..9 change data in item (Unlock memory!)

 

Confirm change

The time each day that the Fire Brigade Delay is automatically switched from ON to OFF
is set in this menu. The time for each day of the week can be allocated. 

Note

 that the

switching of the delay from OFF to ON is a manual only operation using the Fire Brigade
Delay ON/OFF pushbutton with the keyswitch enabled.

If no automatic delay off operation is required, then the time 00h00 must be used, it is
ignored by the FP2000 fire panel. The Fire Brigade Delay can also be manually switched
off at any time using the front panel delay ON/OFF pushbutton.

*See Output Delays, Page 70

Summary of Contents for FP2000


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands