manualshive.com logo in svg

Aritech FP2000, Reference Manual

Share
Download
Aritech FP2000 Reference Manual Download Page 76

Zone on times

(SET TIMES MENU, 6, 

)

ZONES ON                           Fri 07/12/00 10:39:52

Monday

:18:00

Friday

:18:00

Tuesday

:18:00

Saturday

:18:00

Wednesday

:18:00

Sunday

:18:00

Thursday

:18:00

Lnk

:none

0. . 9,

^V,

<>,

E,

     X

Alarms: 0

Faults: 0

Cond.: 0

P: 1

   SDZ

 Return to Set Times Menu

Page 68

 

 

Select item to be changed

 

 or 0..9 change data in item (Unlock memory!)

Confirm change

*See also Zone Off Times, Page 73

Zones that are 

enabled

 for ON/OFF mode (

see Page 96

) will be switched ON at the

times set in this menu if the link is set to None. A separate time for each day of the week
is allowed. A time setting of 00h00 causes no action.

Link: If the link is set to external (Ext.), the Zone On Times are set to 00h00 and the
zones are controlled by the Zones On output. Link must be set to None in order to use the
Zone On Times

Summary of Contents for FP2000


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands