The field "Panel" confirms the fire panel number. The panel ID is also shown on line 8 of
the display: P:p. For global repeaters the word "Panel" becomes "G-Repeater" and line 8
displays G:r. For local repeaters the display is "repeater" and L:p/r is displayed on line 8.
The field Max. Config. :
Panel/repeater show the maximum number of panels and
repeaters, local or global that can be configured. The
options are:
7/31
15/15
31/7
When transferring data from a computer to the fire panel, the fire panel ID of the data file
must match the fire panel ID.
When setup as a Global Repeater or Global Zone Repeater, additional Universal Node
settings are possible:
un-n for a Universal Node on the Setup/NET1/NET2 Port
un-m for a Universal Node on the Modem Port
•
If set to 0/0, the Universal Node ID will automatically assume the ID of the connected
PC or Panel.
•
If set to 0/x (x = valid repeater number) then the Universal Node functions will only
work if the connected PC or Panel will have the same ID.
Summary of Contents for FP2000
