Anritsu MX183000A, Operation Manual, Page: 91 / 226

4.6 Jitter Tolerance Test
4-37
4
O
per
ation
Table 4.6.3-1 Jitter Tolerance Table Setting Items
Item Description
Jitter Freq. [Hz] Sets the jitter modulation frequency.
The setting range is equal to the setting range of the modulation
frequency of MU181500B.
Setting range [Hz] Setting resolution [Hz]
10 to 10 000 1
10 010 to 100 000 10
100 100 to 1 000 000 100
1 001 000 to 10 000 000 1 000
10 010 000 to 100 000 000 10 000
100 100 000 to 250 000 000 100 000
Mask [UI] Sets the mask for the modulation frequency.
The setting range is the setting range for the MU181500B amplitude.
The available ranges and resolutions will vary depending on the 32G
PPG Bit Rate and Clock Setting.
For Bit Rate: 30.000004 to 32.1 Gbit/s
Frequency [Hz]
Setting range
[UIp-p]
Setting resolution
[UIp-p]
10 to 100 000 0 to 1000 0.004
100 100 to 1 000 000 0 to 100 0.004
1 001 000 to 10 000 000 0 to 8 0.004
10 010 000 to 250 000 000 0 to 0.5 0.004
For Bit Rate: 15.000002 to 30 Gbit/s, Clock Setting: Full Rate or
Bit Rate: 2.4 to 30 Gbit/s, Clock Setting: Half Rate
Frequency [Hz]
Setting range
[UIp-p]
Setting resolution
[UIp-p]
10 to 100 000 0 to 2000 0.002
100 100 to 1 000 000 0 to 200 0.002
1 001 000 to 10 000 000 0 to 16 0.002
10 010 000 to 250 000 000 0 to 1 0.002
For Bit Rate: 4.000002 to 15 Gbit/s, Clock Setting: Full Rate
Frequency [Hz]
Setting range
[UIp-p]
Setting resolution
[UIp-p]
10 to 100 000 0 to 1000 0.001
100 100 to 1 000 000 0 to 100 0.001
1 001 000 to 10 000 000 0 to 8 0.001
10 010 000 to 250 000 000 0 to 0.5 0.001