Anritsu MX183000A, Operation Manual, Page: 70 / 226

Chapter 4 Operation
4-16
Table 4.4.2-3 TS Option Setup Items
Item Description
TS Parameter
FTS Sets the TS FTS Number.
Link Number Sets the TS Link Number.
Lane Number Sets the TS Lane Number.
Full Swing Sets the TS Full Swing.
Low Frequency Sets the TS Low Frequency.
SRIS Displays the Separate Refclock with Independent SSC
operation.
Disable Scrambling Sets whether to use scrambling for TS.
Reset EIEOS Interval Sets the TS Reset EIEOS Interval value.
SKP
SKP Insert Sets whether to insert SKP OS while sending TS.
Symbol Length Specifies the SKP OS length.
Interval Specifies the SKP OS interval.
Send TS
Polling.Active Sets the type of TS sent for Polling Active State.
Loopback.Entry Sets the type of TS sent for Loopback Entry State.
Rev3.x/Rev4.0 Preset
Downstream*
Displays the parameters used by the Downstream Port (32G
PPG) which is set in TS sent by the 32G PPG..
Preset(DE,PS [dB]) Transmitter Preset value.
Preset Hint Receiver Preset Hint value.
Precursor Precursor value.
Cursor Cursor value.
Postcursor Postcursor value.
Rev3.x/Rev4.0 Preset
Upstream*
Displays the parameters requested by 32G PPG from the
DUT (Upstream Port) and set in TS sent by the 32G PPG.
Usepreset The parameter to be used by Upstream Port (either Preset or
Cursor) is displayed.
Preset(DE,PS [dB]) Transmitter Preset value.
Preset Hint Receiver Preset Hint value.
Precursor Precursor value.
Cursor Cursor value.
Postcursor Postcursor value.
*: These values are fixed, and cannot be changed.
Displayed for Rev3.x and Rev4.0.