Anritsu MX183000A, Operation Manual, Page: 128 / 226

Chapter 5 Remote Control
5-22
:SYSTem:MMEMory:SETTing:RECall <file_name>
Parameter <file_name>=<STRING PROGRAM DATA>
"<drv>:\<dir1>\<dir2>\<file>"
<drv>=C, D, E, F
Drive name
<dir>=xxxxxxxx Directory name
<file>=xxxxxxxxx File name
Function Loads measurement setting conditions.
Example
> :SYSTem:MMEMory:SETTing:RECall
"C:\test_folder\test_setting"
:SYSTem:EQUipment:SEARch:SETTing <info>,<number>
Parameter <info>=<STRING PROGRAM DATA>
TCPIP0::<address>::<port>::SOCKET
<address>=xxx.xxx.xxx.xxx
IP address
<port>=xxxx port
<number>=<DECIMAL NUMERIC PROGRAM DATA>
1 to 3
No.1 to 3
Function Specifies the controller number, and sets the IP address and port.
Example Set the MP1800A assigned the IP Address 192.168.2.100 and port 5001 to
controller No. 2.
>:SYSTem:EQUipment:SEARch:SETTing
TCPIP0::192.168.2.100::5001::SOCKET,2