Anritsu MX183000A, Operation Manual, Page: 117 / 226

5.3 Command Description Method
5-11
5
R
em
ot
e C
on
trol
The following shows the description example of command.
■ Example of program command
:DISPlay:MEASure:CHANge <type>
Parameter <type>=<CHARACTER PROGRAM DATA>
SETTing
Setting screen
RESult Result screen
REPort Report screen
Function
Switches the display screen for Tolerance/Sweep measurement.
Result cannot be specified for measurement not executed.
Example Displays the Result screen for Tolerance measurement.
> :DISPlay:MEASure:CHANge RES
Program command
Parameter type name
Parameter type
Parameter contents
Command example
■ Example of query command
:SENSe:MEASure:SYSCond:SJSelect?
Response <type>=<CHARACTER RESPONSE DATA>
OFF,SJ,SJ2
Function Queries the sine wave jitter setting fixed and added for
Tolerance/Sweep measurement.
Example
> :SENSe:MEASure:SYSCond:SJSelect?
< SJ2
Command example, response example
Program command
Parameter type name
Parameter type
The < and > in the example indicate the response and the program
message respectively.
Notes:
● Any commands for MX183000A are sequential commands.
● If commands have restrictions, other settings may be affected.
For the setting items to be affected and conditions to be
restricted, refer to the
MX180000A Signal Quality Analyzer
Control Software Operation Manual and operation manual for
each module.
● When the parameters of program command and query
command are same, the parameter of query command may be
omitted.