Anritsu MX183000A, Operation Manual, Page: 190 / 226

Chapter 5 Remote Control
5-84
:DISPlay:RESult:ESTimate:ERATe <numeric1>,<numeric2>
Parameter <numeric1>=<DECIMAL PROGRAM DATA>
1.0 to 9.9
XX:XXE-YY
<numeric2>=<DECIMAL PROGRAM DATA>
9 to 20
YY:XXE-YY
Function Sets the BER for JTOL Estimation.
Example To set the BER for JTOL Estimation to 5.5E–15:
> :DISPlay:RESult:ESTimate:ERATe 5.5,15
Compatibility Incompatible with existing models.
:DISPlay:RESult:ESTimate:ERATe?
Response <numeric1>,<numeric2>
<numeric1>=<DECIMAL RESPONSE DATA>
1.0 to 9.9
XX:XXE-YY
<numeric2>=<DECIMAL RESPONSE DATA>
9 to 20
YY:XXE-YY
Function Queries the error rate setting set for BER for JTOL Estimation.
Example
> :DISPlay:RESult:ESTimate:ERATe?
< 5.5,15
Compatibility Incompatible with existing models.
:SENSe:MEASure:BERCond:SEARch <type>
Parameter <type>=<CHARACTER PROGRAM DATA>
BINary
Binary
DLINear Downwards Linear
DLOG Downwards Log
ULINear Upwards Linear
ULOG Upwards Log
BINLinear Linear
Function Sets the tolerance measurement method.
Example To set the tolerance measurement method to Binary:
> :SENSe:MEASure:BERCond:SEARch BIN
:SENSe:MEASure:BERCond:SEARch?
Response <type>=<CHARACTER RESPONSE DATA>
BIN, DLIN, DLOG, ULIN, ULOG, BINL
Function Queries the tolerance measurement method.
Example
> :SENSe:MEASure:BERCond:SEARch?
< BIN