Anritsu MX183000A, Operation Manual, Page: 184 / 226

Chapter 5 Remote Control
5-78
:CALCulate:RESult:DATA? <type>[,<numeric>]
Parameter <type>=<CHARACTER PROGRAM DATA>
ALL
All measurement points
POINt Specified point
<numeric>=<DECIMAL NUMERIC PROGRAM DATA>
1 to 50
Measurement points No.1 to 50
When <type> is ALL, <numeric> can be omitted.
Response <string>=<STRING RESPONSE DATA>
<string>="<number>,<freq>,<measui>,<measjudge>,<estimateui>,<r2>,
<estimatejudge>,<flow>"
<number>=<NR1 NUMERIC RESPONSE DATA>
1 to 50
Measurement point No.1 to 50
<freq>=<NR1 NUMERIC RESPONSE DATA>
10 to 250000000
Hz modulation frequency
<measui>=<NR2 NUMERIC RESPONSE DATA>
0.001 to 2000.000
UIp-p modulation amount
<measjudge>=<NR1 NUMERIC RESPONSE DATA>
1
Pass
0 Fail
–1 Not measured
<estimateui>=<NR2 NUMERIC RESPONSE DATA>
0.000 to 2000.000
UIp-p modulation amount
<r2>=<<NR2 NUMERIC RESPONSE DATA>
0 to 1
Coefficient of determination with degree of
freedom determined, no units
<estimatejudge>=<NR1 NUMERIC RESPONSE DATA>
1
Pass
0 Fail
–1 Not measured
<flow>=<NR1 NUMERIC RESPONSE DATA>
1
overflow
0 no overflow
–1 Not measured
Function Acquires tolerance measurement results.
Example To acquire all measurement results of the Tolerance measurement.
> :CALCulate:RESult:DATA? ALL
< "1,1000,5.000,1,2.000,0.995,1,1", "2,1000,5.000,1, 2.000,
0.995,1,1", "3,1000,5.000,1, 2.000, 0.995,1,1",…
"20,200000000,0.150,1,0.100, 0.995,1,1"
To acquire measurement data for tolerance measurement No. 10
> :CALCulate:RESult:DATA? POINt,10
< "10,100000,1.000,0,0.600, 0.995,0,0"