Anritsu MX183000A, Operation Manual, Page: 164 / 226

Chapter 5 Remote Control
5-58
:LTRaining:SEQuence:SPECification?
Response <type>=<CHARACTER RESPONSE DATA>
GEN1, GEN 2
Function Queries the environment to loopback the DUT supporting USB3.0/3.1.
Example
> :LTRaining:SEQuence:SPECification?
< GEN1
:LTRaining:SEQuence:TEST:PATTern:TRANsmit
Parameter None
Function Transmits the pattern selected at Test Pattern continuously.
Example
> :LTRaining:SEQuence:TEST:PATTern:TRANsmit
:LTRaining:SEQuence:TEST:PATTern:STOP
Parameter None
Function Stops sending the test pattern.
Example
> :LTR
aining
:SEQ
uence
:TEST:PATT
ern
:STOP
:SOURce:PATTern:TYPE <type>
Parameter <type>=<CHARACTER PROGRAM DATA>
COMPliance
Compliance pattern
USER USER pattern
Function Selects the test pattern to be sent after completing the link training
sequence transmission.
Selecting "USER" outputs the test pattern selected on the MX180000A
MU183020A setup screen.
Example To set the test pattern to Compliance Pattern:
>:SOURce:PATTern:TYPE COMPliance
:SOURce:PATTern:TYPE?
Response <type>=<CHARACTER RESPONSE DATA>
COMP, USER
Function Queries the test pattern to be sent after completing the link training
sequence transmission.
Example
> :SOURce:PATTern:TYPE?
< COMP