Anritsu MX183000A, Operation Manual, Page: 127 / 226

5.7 Setting Measurement System
5-21
5
R
em
ot
e C
on
trol
Table 5.7-1 Setting Commands of Main Window
No. Setting Item Command
[1] Exit :SYSTem:MEASure:EXIT
Initialize :SYSTem:MEASure:INITialize
Save :SYSTem:MMEMory:SETTing:STORe
Load :SYSTem:MMEMory:SETTing:RECall
[2] MP1800A :SYSTem:EQUipment:SEARch:SETTing
:SYSTem:EQUipment:SEARch:SETTing?
[3] Search Enable :SYSTem:EQUipment:SEARch:ENABle
:SYSTem:EQUipment:SEARch:ENABle?
[4] Search Start :SYSTem:EQUipment:SEARch:STARt
[5] Connect :SYSTem:EQUipment:CONNect
Disconnect :SYSTem:EQUipment:DCONnect
[6] Equipment :SYSTem:EQUipment:SETTing
:SYSTem:EQUipment:SETTing?
:SYSTem:EQUipment:SETTing:MODule?
:SYSTem:MEASure:EXIT
Parameter None
Function Closes the application.
Example
> :SYSTem:MEASure:EXIT
:SYSTem:MEASure:INITialize
Parameter None
Function Initializes the various measurement setting conditions.
Example
> :SYSTem:MEASure:INITialize
:SYSTem:MMEMory:SETTing:STORe <file_name>
Parameter <file_name>=<STRING PROGRAM DATA>
"<drv>:\<dir1>\<dir2>\<file>"
<drv>=C, D, E, F
Drive name
<dir>=xxxxxxxx Directory name
<file>=xxxxxxxxx File name
Function Saves the measurement setting conditions.
Example
> :SYSTem:MMEMory:SETTing:STORe
"C:\test_folder\test_setting"