Anritsu MX183000A, Operation Manual, Page: 7 / 226

vii
Before Using VISA*
1
For Those Who Use MP1800A
To use the MX183000A High-Speed Serial Data Test Software (hereafter
MX183000A), you are required to install National Instruments™ (hereafter
NI™) NI-VISA™*
2
on the PC controller. We recommend using
NI-VISA™*
2
provided in the USB memory stick that contains
MX183000A.
You are allowed to use NI-VISA™*
2
contained in the USB memory
stick only for the purpose of using it for MX183000A. Use of
NI-VISA™*
2
for any other product or purpose is prohibited.
When uninstalling MX183000A from the PC controller, uninstall
NI-VISA™ that was installed from the USB memory stick as well.
Glossary of Terms:
*1: VISA: Virtual Instrument Software Architecture
I/O software specification for remote control of measuring
instruments using interfaces such as GPIB, Ethernet, USB, etc.
*2 :NI-VISA™
World de facto standard I/O software interface developed by NI
and standardized by the VXI Plug&Play Alliance.
Trademarks:
- National Instruments™, NI™, NI-VISA™ and National Instruments
Corporation are all trademarks of National Instruments Corporation