Anritsu MX183000A, Operation Manual, Page: 132 / 226

Chapter 5 Remote Control
5-26
:SYSTem:EQUipment:SETTing? <type>
Parameter <type>=<CHARACTER PROGRAM DATA>
JITTer
Jitter Modulation Source
PPG PPG
ED ED
Response <number>=<NR1 NUMERIC RESPONSE DATA>
1 to 3
MP1800A No.1 to 3
0 None
<unit>=<NR1 NUMERIC RESPONSE DATA>
1 to 4
Unit 1 to 4
<slot>=<NR1 NUMERIC RESPONSE DATA>
1 to 6
Slot 1 to 6
0 None
[<data_if>]=<NR1 NUMERIC RESPONSE DATA>
1 to 4
Data 1 to 4
Note:
<data_if> returns when the module installed in slot is bellow:
MU183020A, MU183021A, MU183040A/B, MU183041A/B
Function Queries the equipment used for the measurement.
Example To query the equipment used for the jitter modulation source:
> :SYSTem:EQUipment:SETTing? JITTer
< 1,1,4
When equipment is not assigned, the response of (None) is as follows:
< 0,0,0