Anritsu MX183000A, Operation Manual, Page: 138 / 226

Chapter 5 Remote Control
5-32
:LTRaining:SEQuence:STARt
Parameter None
Function Starts transmitting a link training sequence for looping back DUT.
Once the transmission is complete, the pattern selected by Test Pattern
is sent.
Example
> :LTRaining:SEQuence:STARt
:LTRaining:SEQuence:STOP
Parameter None
Function Stops transmitting link training sequence and test pattern and sets to
Electrical Idle.
Example
> :LTRaining:SEQuence:STOP
:LTRaining:SEQuence:STATe?
Response <numeric>=<NR1 NUMERIC RESPONSE DATA>
0
Stop
1 Sending
2 Sending test pattern
Function Queries the link training sequence transmission status.
Example
> :LTRaining:SEQuence:STATe?
< 1
:LTRaining:SEQuence:SPECification <type>
Parameter <type>=<CHARACTER PROGRAM DATA>
REV1
Revision1.0/1.1
REV2 Revision2.0
REV3 Revision3.0/3.1
REV4 Revision4.0
Function Selects the environment (revision) to loopback the DUT.
Example To set the environment to REV4(16.0 GT/s):
> :LTRaining:SEQuence:SPECification REV4
Note:
The clock frequency input to MU181500B must be changed by the
user when MU181000A/B is not installed.