Anritsu MX183000A, Operation Manual, Page: 185 / 226

5.10 Jitter Tolerance Setup Screen
5-79
5
R
em
ot
e C
on
trol
:SENSe:MEASure:SYSCond:BITRate?
Response <numeric>=<NR2 NUMERIC RESPONSE DATA>
2.400000 to 32.100000 2.400000 to 32.100000 Gbit/s
Function Queries the tolerance measurement bitrate monitor value.
Example
> :SENSe:MEASure:SYSCond:BITRate?
< 8.000000
:SENSe:MEASure:TABLedata:SAVe <file_name>
Parameter <file_name>=<STRING PROGRAM DATA>
"<drv>:\<dir1>\<dir2>\<file>"
<drv>=C, D, E, F
Drive name
<dir>=xxxxxxxx Directory name
<file>=xxxxxxxxx File name
Function Saves the jitter tolerance table contents (measurement points and
masks).
Example
> :SENSe:MEASure:TABLedata:SAVe
"C:\test_folder\test_table"
:SENSe:MEASure:TABLedata:OPEN <file_name>
Parameter <file_name>=<STRING PROGRAM DATA>
"<drv>:\<dir1>\<dir2>\<file><extension>"
<drv>=C, D, E, F
Drive name
<dir>=xxxxxxxx Directory name
<file>=xxxxxxxxx File name
<extension>=.umsk,.mask
Function Reads in jitter tolerance table contents (measurement points and masks).
Example
> :SENSe:MEASure:TABLedata:OPEN
"C:\test_folder\test_table.umsk"
:SENSe:MEASure:TABLedata:SELect?
Response <item>=<STRING RESPONSE DATA>
"xxxxxxxxxxx"
File name
Function Queries the selected table data.
Example
> :SENSe:MEASure:TABLedata:SELect?
< "PCI"