www.accuenergy.com
V: 1.10 Revised: January 2020
89
Chapter 10: Web Interface Readings and Parameter Settings
The Clear Post Channel Logs button will allow users to clear the buffered files on meter.
The AXM-WEB2 can post data to a server at intervals of time ranging from 1 minute to 1 month.
The settings for configuring the post channels to post the data can be found by clicking on 'Set
-
tings' and then selecting 'Communications' tab. Click "Post Channels" to configure any of the
three post channels.
Post Channel 1 Enable: Enable the Post Channel 1 in order to configure the settings needed to
post data via the HTTP(S)/FTP post functions
Post Method: Select the method for posting the files, the user can choose HTTP/HTTPS or FTP
Post Name Fixed: This configuration needs to be enabled in order for user to control the name
of the file that will be posted. Otherwise file name will be based on the Log File Name Format
configuration from the Data Log settings
Post File Name:
Users can enter a name for the file that will be posted as if 'Post Name Fixed' is
enabled
If the HTTP/HTTPs post method is selected:
HTTP/HTTPS URL:
Enter the URL for the HTTP/HTTPS server. The URL needs to begin with the
prefix http:// or (https://)
HTTP/HTTPS Port:
Enter the port number the server will be listening on
HTTP/HTTPS Meter ID:
Enter a name or description for the meter to be identified on the serv
-
er
If the FTP post method is selected:
FTP URL:
Enter the URL for the FTP server. The URL needs to begin with the prefix ftp://
FTP Port:
Enter the port number the server will be listening on
FTP Username:
Enter the username required to log into the FTP server
FTP Password:
Enter the password required to log into the FTP server
NOTE:
The 'TEST Post Channel' button should only be utilized after clicking the 'Save' button
otherwise a fail response will be observed. If a fail response occurs after clicking 'Save' confirm
the network settings or credentials for the server.