www.accuenergy.com
V: 1.10 Revised: January 2020
81
Chapter 10: Web Interface Readings and Parameter Settings
The content of the emails can either be time based triggered or event based triggered.
For receiving emails on a time based under Enable Periodic Email Reporting:
Enter a time between 5-1440 mins in the Set time interval
• Check off the box beside the parameters for the content the user should receive.
Metering Data: Report on Real-time voltage, current, power and etc.
Energy Data: Report on energy parameters.
Harmonics Data: Report on the voltage and current harmonics from 2
nd
to 63
rd
.
Sequence & Phase Angles: Report on the positive, negative and zero components of the
voltage and current waveform.
Min/Max: Report on the maximum and minimum statistics that the meter has recorded
since the lifetime of the meter or from the last reset of the min/max statistics.
Alarm: Report of the alarm log.
SOE Record: Report of the SOE log.
Waveform: Report of the waveform log.
After configuring the above settings, the next step is to select the content for the emails.