www.accuenergy.com
V: 1.10 Revised: January 2020
109
Chapter 10: Web Interface Readings and Parameter Settings
Reset to Factory
The AXM-WEB2 supports a reset to factory function where if reset the module settings would be
configured back to its default factory settings. This impacts all configurations and logs stored
on the module.
NOTE:
This setting is permanent and cannot be undone!
Debug Diagnostic
The debug diagnostic allows the user to enable or disable the debug logs. The current status
will say 'All off' if disabled, 'All On' if enabled.
Users can click on the advanced link, to turn on or off specific debug logs. If certain debug logs
are enabled the current status will show 'Partial On'.
NOTE:
The system performance may be affected by enabling the debug logs.
SSH
The WEB2 module supports the SSH which can be enabled to allow users to remotely log into
the meter using the SSH protocol. When enabled the status will show 'On', when disabled the
status will show 'Off'.