AXM-WEB2 for Acuvim II Series Power Meter
www.accuenergy.com
V: 1.10 Revised: January 2020
10
• The cursor will be on ‘SYS’. Press ‘V/A’ on this screen to get to the system settings. This will
show screen ‘S01 ADDR’.
• Press the 'E' button until you get to 'S34 PROTOCOL 2'. Select the 'WEB2' protocol.
•
Press ‘V/A’ to modify the setting; the cursor should now flash.
• Press ‘P’ or ‘E’ to select 'WEB2'.
•
Press ‘V/A’ to confirm the change.
Once the protocol 2 setting of the Acuvim II meter is configured for WEB2, users can now view
all necessary settings in the meters NET settings.
Press the 'H' button to exit the system setting, you will be directed to the parameter selection
screen.
Press the 'P' or 'E' button to move the cursor to 'NET' and press the 'V/A' button to enter the
Ethernet module settings.