www.accuenergy.com
V: 1.10 Revised: January 2020
82
AXM-WEB2 for Acuvim II Series Power Meter
The user will receive an email with csv file attachment.
For receiving emails on a event based select either Alarm Event, SOE Record or Waveform Data
under the Enable Real-time Email Reporting.
NOTE: Waveform Data is only available for Acuvim IIW model.
The user will receive an email with csv file attachment corresponding to the triggered event
selected.
Time/Date
The device clock of the Acuvim II series meter can be set through the web interface of the AXM-
WEB2 module. The AXM-WEB2 module also supports the NTP (Network Time Protocol) protocol
so that the module can update the meter's device clock by synchronizing with a time server.
The module can sync with up to 3 time servers. If a time server is down, the module will syn-
chronize with the second or third time server if they are configured.
The settings for the time and date can be found by clicking on the 'Settings' and selecting the
'Communications' tab. Users can select 'Time/Date' to configure the time settings.
The following must be configured to set the time/date and NTP settings:
NTP Enabled: Select enable to further configure the settings related to the NTP (Network Time
Protocol) function
Device Clock:
Configure the date and time on the meter
• Click on the
icon to configure the date and time.
• Click on the icon in the bottom right to clear the time and date.