www.accuenergy.com
V: 1.10 Revised: January 2020
66
AXM-WEB2 for Acuvim II Series Power Meter
• Analog Input - There are two analog input channels, users can select the type based on the
type of module they have.
• The AI types are:
1. 4-20mA
2. 0-20mA
3. 1-5V
4. 0-5V
IO Logic Address
From the WEB2 interface users have the option to change the logic addresses for the AXM-
IO1 and AXM-IO3 modules. This is useful when users have two modules with the same logic
address. For example if the user has two AXM-IO1-1 and attaches them both to the meter, the
meter will only recognize one of the modules. This function allows the user to change the logic
number from 1 to 2 where the user would then have one AXM-IO1-1 module and one AXM-IO1-2
module.
To change the logic address the module must be attached and installed on the back of the me-
ter after the WEB2 communications module. Simply click on the drop down menu and select
the corresponding logic address.
NOTE:
The meter be physically power cycled in order for the logic address change to take effect.