www.accuenergy.com
V: 1.10 Revised: January 2020
75
Chapter 10: Web Interface Readings and Parameter Settings
WiFi Enabled: Select the Enable or Disable communication through WiFi.
WiFi Mode:
The WiFi can be configured to work in two modes just like any other WIFI device. It
can be configured as either Access Point(AP) or Station mode.
Access Point: Default configuration for AXM-WEB2. The AXM-WEB2 will act as a wireless access
point and will allow other wireless devices to connect and access the AXM-WEB2.
• In Access Point mode, users can configure the SSID, Network Key and IP of the AXM-WEB2
module as well as the DHCP DNS servers.
Station: The AXM-WEB2 will behave like a wireless client and bridge to another wireless net-
work that is available.
• In Station mode, users can select the Wireless network to connect to under the "Connect
to SSID" setting. Click on "Select from Available Networks" and enter the Network Key for
the wireless network that the AXM-WEB2 will bridge to.
• If users are connecting to an open Wireless network that is not password protection, the
password field can be left blank.
• The AXM-WEB2 also supports Enterprise WiFi, where users can connect using an enter-
prise level WiFi network which is common in many colleges/universities, hospitals, etc.
When attempting to connect to an enterprise level WiFi network the interface will show
options to connect to the network with a username and password.