Abus SECVEST FUAA50 Series, Installer Manual

Page: 281 / 327

Appendix
281
DC-09
Note
The provisions of the following document apply here.
ANSI/SIA DC-09-2013: Internet Protocol Event Reporting
SIA Digital Communication Standard
– Internet Protocol
Event Reporting
S/W <= v3.00.03 Messages are sent
without encryption (unencrypted) .
S/W >= v3.00.03 Messages can also be sent with encryption .
The alarm control panel automatically uses the IP-based protocol DC-09 if the alarm control panel uses Ethernet
(LAN) as an outgoing communication path.
In doing so, the data from traditional protocols are packed into IP packages and transferred.
Note:
Details can be found in the DC-09 and DC-07 specification from SIA and in the corresponding standards that
are mentioned in these documents.
The
tokens used are:
Protocol Token Definition
FF
“SCN-S8”
Scancom 4-8-1, 5-8-1, 6-8-1
CID
“ADM-CID”
Ademco Contact ID
SIA 1, SIA 2, SIA 3, Ex SIA 3,
Ex SIA 3 V2, Ex SIA 3 V3
“SIA-DCS”
SIA DCS
TCP
The TCP internet protocol is used for the transmission.
Note
TCP uses port 9999.
If it is not possible to send messages, it may be that the firewall has also blocked various
outgoing ports. Therefore,
check the firewall settings on the router/IAD.
Information on implementation in the Secvest with reference to chapter 5.5.1 "Event Messages (PE)" of the CD-09
specification.
Contents Chapter
DC-09
Specifica-
tion Use in the Secvest Comments
LF 5.5.1.1 Yes
CRC 5.5.1.2 Yes
0LLL 5.5.1.3 Yes
ID 5.5.1.4 Yes Token, see above
Seq 5.5.1.5 Yes
Rrcvr
Receiver num-
ber
5.5.1.6.3 No Nothing is sent