Abus SECVEST FUAA50 Series, Installer Manual

Page: 214 / 327

Configuration
214
Role Meaning
Walk Test Bell

On: An info tone sounds when a detector is operated.

Off: No info tone sounds.
All detectors belonging to the system can be tested here. The zones can be individually se-
lected during test. Activate all detectors in the building one after the other. If a detector is trig-
gered the alarm panel emits two signal tones The Alarm column will display whether a detec-
tor has detected an alarm. The tamper column will display whether a tamper contact has
been triggered.
Walk test (cont.)
Report
The test results can also be printed out and saved via the web interface.
Alarm panel
System
All detectors belonging to the system can be tested here. Activate all detectors in the building
one after the other. If a detector is triggered the alarm panel emits two signal tones It also in-
dicates on the display whether a tamper contact (S) and/or alarm (A) was triggered.
The top of the display shows the number of zones still to be tested (alarm and tamper).
When all detectors have been tested the system writes "All Zones tested".
Partitions

Detectors from a specific partition can be tested here.

Once the partitions are selected only the detectors in the selected partitions are displayed.
Zones

Selected detectors can be tested here.
A list of all detectors appears. Select the detectors to be tested with Yes .