Abus SECVEST FUAA50 Series, Installer Manual

Page: 225 / 327

Configuration
225
Role Meaning
Zone Resistances The current resistances for the wired zones are displayed here.
Display on the alarm panel:
The zone names are displayed. To view the zone numbers, press the right menu key.
Test all variants according to the type of wiring to determine whether they meet the require-
ments:

Alarm contact open/closed

Tamper contact open/closed

Short circuits

Open (isolated circuits)
0k00 means 0 ohms or NC
For wiring type "4-wire CC" the display switches between the resistance of the
alarm loop (A) and the resistance of the tamper loop (S).
Example for a "2-wire FSL 2K2/4K7" zone

Alarm contact closed (standby)
2k18

Alarm contact open
6k89

Alarm contact open and series resistor bridged
4k68

Short circuit in line to detector
0k00

Line disconnection
NO
Panel PSU Here you can find information about the voltage values of the power supply. The display is
identical on the alarm panel and the web interface.
Ext. DC voltage in

The voltage value of the external DC power source
Panel Battery 1

The voltage value of the first battery
Panel Battery 2

The voltage value of the second battery
Aux. Voltage Out

The voltage value at the terminal clamp 0 V/12 V AUX
Example (battery 2 is not connected in this example)

Ext. DC voltage in 14.1 volts

Panel Battery 1 8.3 volts

Panel Battery 2
0.1 volts

Aux. Voltage Out 13.9 volts
RF repeater Here you can find information about the signal strength of the components on the re-
peater.
This is the signal strength on the repeater of the received notifications from the com-
ponents. The display is identical on the alarm panel and the web interface