Abus SECVEST FUAA50 Series, Installer Manual

Page: 124 / 327

Configuration
124
Name/function Explanation (checkbox)
Quick Set Enabled
Alarm system can be armed using the symbol keys without entering the user code
first.
Deactivated
Alarm system can only be armed after the user code has been entered.
Quick Omit Enabled
Open zones are automatically omitted when the alarm system is armed (if the zone
attributes for omission allow).
Deactivated
Open zones must be manually omitted when the alarm system is armed.
User Code Req’d
Use this option to ensure that an installer only has access to the system when a
user is present.
Activated / J (factory default)
After the installer has entered their code, the system prompts the user to enter their
user code. Only once a user code has also been entered does the installer gain ac-
cess to the system.
Alarm panel
Installer Mode -> System -> User Access -> User Code Required
J (factory default)
Deactivated
The installer can access installer mode after entering their code; no additional user
code is required.
Note
The "Disarmed/No" setting is not compliant with EN50131.
The factory default is required to be compliant, i.e. Level 2 users must be
awarded Level 3 user access (Installer).
EN50131-1, chapter 8.3.1 access levels (with reference to EN50131-3,
chapter 8.3.1 access levels (AL))
"Access to access level 3 must be prevented unless either
a) ->access was enabled by a user with access level 2 or
b) -
> …."
The "Disarmed/No" setting only complies with BS8243 when the user has provided
written consent.
2 Way Replies Enabled
There is active status feedback from the wireless alarm system to the wireless re-
mote control, wireless control device, Secvest key and additional door lock.
Deactivated
2 Way Replies are deactivated.