Abus SECVEST FUAA50 Series, Installer Manual

Page: 256 / 327

Appendix
256
Security
Supervision
Fault
Tamper when country = UK "TAMPER" for UK to fulfil
PD6662:2010
Jamming Fault
Tamper when country = UK "TAMPER" for UK to fulfil
PD6662:2010
Remote Updates Disabled
Tamper Omit
Disabled This setting is required to fulfil
EN50131.
Force Set
Off If Force Set is enabled, the system
is not compliant with EN50131.
Remote Unset Full Set Always
Remote Unset Part Set Always
Ctrl Device Unset Full Set
Always
Ctrl Device Unset Part
Set
Always
Auto Rearm Never This setting is required to fulfil
EN50131.
Only appears if the confirmation
mode is set to "Basic".
Silence Alerts
User Code
Abort time
120 seconds
Entry Alarm Delay
Enabled This setting is required to fulfil
EN50131-1 8.3.8.2.
Broadcast Panel Status No
Panel upgrade
"V3.00.03
– Installed"
Checking for an upgrade?
Once the selection has been made,
the alarm panel automatically
checks whether a new software ver-
sion is available on the ABUS FTP
server.
Backup/restore
Backing up config to the
SD card
Loading config from SD
card "Secvest
—04-12-2017-0932.cfg"
Report Only on web interface
5. COMMUNICATION
Network
Network Setup
Web server Enabled
DHCP
On
IP address
Empty This option will only be displayed,
S/W>=2.00.00 DHCP=off
IP Port Number
80 S/W <2.00.00
Internal HTTP port 80
Internal HTTPS port
4433
IP Subnet Mask
Empty This option will only be displayed,