Abus SECVEST FUAA50 Series Installer Manual Download Page 123

Page: 123 / 327

Configuration

123

Deactivated

Function not possible.

Social Care Key

Enabled

Manual triggering of a social care alarm is possible by simultaneously pressing the
corresponding dual keys on the alarm system or control device.

Danger

S/W >= 2.01.08

You are using the

touch

front on the alarm system. The backlighting is set to “When

active” and the backlighting is

dark.

The

backlighting

first

activated when a key has been touched (first touch).

other

action

results from this "first touch". The keypad functions as

normal

from the

second

touch on.

For details, see the user guide section 10.5.1 Functions - backlighting.

Deactivated

Function not possible.

Omit All

Enabled

All open zones can be omitted manually together when the alarm panel is armed.

Deactivated

Open zones must be individually omitted manually when the alarm panel is armed.

Summary of Contents for SECVEST FUAA50 Series








































































































































































































































































































































Search results

Summary of Contents for SECVEST FUAA50 Series

Reviews:

Related manuals for SECVEST FUAA50 Series

Brands by name

Popular brands

Abus SECVEST FUAA50 Series, Installer Manual

Search results

Summary of Contents for SECVEST FUAA50 Series

Reviews:

Related manuals for SECVEST FUAA50 Series

Brands by name

Popular brands