Abus SECVEST FUAA50 Series, Installer Manual

Page: 45 / 327

Configuration
45
Status
No. Name/function No. Name/function
1 Partition selection
Selection fields/tabs for individual partitions:

An alarm that is confirmed by the user but not re-
set is displayed in the corresponding partition as
a warning symbol.

Clicking this warning symbol
resets this alarm.
2 Status display
The status display contains information including:

faults in the individual partitions

Faults across partitions
(e.g. "Ext DC fault")

open zones (across partitions)
Only for the alarm control panel display
Note:
A "warning triangle" appears at the bottom of the display on the right-hand side if the alarm panel detects a problem.
The explanation (description of the problem) is not shown unless an access level 2 (user) or access level 3 (installer)
code is entered. After a valid code has been entered the message appears in plain text (problem, fault, warning, alarm
etc.) The message is hidden again once the user has acknowledged or confirmed it. The notification disappears auto-
matically after a one-minute time out.