Abus SECVEST FUAA50 Series, Installer Manual

Page: 268 / 327

Appendix
268
Repairs and maintenance
The alarm control panel should be checked once a year. During every inspection:

Check the Secvest for visible signs of damage on the housing or the front cover.

Check the condition of the housing-tampering switch and the wall-tampering switch (wall-removal contact)

Check the condition of the backup battery

Check the cabling for visible signs of damage or wear

Check the keypad for visible signs of damage

Test the function of all keys on the keypad

Clean the keypad surface, the display and the housing
o
When cleaning the surface, use a soft, dry cloth.
o
Do not use any water, solvents or cleaning agents.

Check the signal strength and the battery condition of all detectors, keypads, external sirens, indoor sirens,
WAMs, door locks, remotes, hold up pendants, medical pendants and care pendants.

Replace the batteries when recommended by the manufacturer

Test every component.

Carefully clean the lenses on all PIR detectors and cameras using a soft, clean, dry cloth.

Do not use any water, solvents or cleaning agents.

Carry out a walk test on all detectors.

Test all external sounders

Test the communication.

EN50131-7 "Alarm systems
– intrusion and hold up alarms – part 7: application rules" must also be taken into
consideration.
It is not necessary to check any calibrations or adjustments.