Abus SECVEST FUAA50 Series, Installer Manual

Page: 67 / 327

Configuration
67
Info module/indoor siren
Name/function Explanation
Updates Enabled
Status updates on the info module activated
– a status change on the alarm system
or zones is displayed "just in time".
Deactivated
No update on the info module and indoor siren
– the indoor siren also does not trig-
ger any alarm accordingly.
Ready-to-Set LED Enabled
Ready-to-Set LED activated on the info module.
Deactivated
Ready-to-Set LED deactivated on the info module.
Add Panel (alarm panel only)
1. After selecting this menu item, the following display
appears:

Select Add/Del Siren.
2. Select the corresponding siren.
3. After selecting this menu item, the following display
appears:

Is the receiver is teach-in mode?
4. Switch the indoor siren or info module to teach-in
mode. Follow the instructions provided in the guide
for the product.
5. Activate the sending of wireless information from the
alarm panel by pressing Yes .
6. The following display appears:
Did the receiver beep twice?
7. Confirm with Yes.
8. The teach-in message and therefore the IP of the
alarm panel have been correctly received and suc-
cessfully stored in the indoor siren or info module.
9. To repeat or cancel, press No .