Abus SECVEST FUAA50 Series, Installer Manual

Page: 280 / 327

Appendix
280
Extended SIA 3 #AAAAAA|Ntihh:mm/idnnn/rinn/CCcc/AS
Extended SIA 3 V2 #AAAAAA|Ntihh:mm|idnnn|rinn|CCcc|AS
Extended SIA 3 V3 #AAAAAA|Ntihh:mm/idnnn/rinn/CCcc^AS^
Whereby:
AAAAAA Adjustable 6-digit account number (e.g. 123456).
"N" New event (always N)
"ti"hh:mm/ Time (e.g. ti10:23/).
"id"nnn/ User number, when usable, otherwise not sent (e.g. id123/ or id6/)
"ri"nn/ Partition number (e.g. ri12/ or ri3).
CC Event code (e.g. FA = Fire Alarm).
cc Zone or control panel number, when usable, otherwise not sent (e.g. 23 or 5)
"A"S Text description of the event, usually a description of the log book event
Note:
The alarm control panel sends the characters that are between " and " shown above exactly as they are listed in the
table above.
Example
The different formats for the SIA protocol appear as follows in the event of a fire alarm in zone 2 of partition 4 at 10:15
with the account number 10 for partition 4:
SIA1 #000010|NFA2
SIA2 #000010|N/ri4/FA2
SIA3 #000010|Nti10:15/ri4/FA2
#000010|AFire Zone 2
Extended SIA3 #000010|Nti10:15/ri4/FA2/AFire Zone 2
Extended SIA3 V2 #000010|Nti10:15|ri4|FA2|AFire Zone 2
Extended SIA3 V3 #000010|Nti10:15/ri4/FA2^AFire Zone 2^
Note about Extended SIA3 V2:
Some S/W versions that work in the SIA recipients do not always recognise the "/" text separator. This may cause
problems. This incorrectly results in "mains fail" messages on the ARC (ESCC). This may occur when arming or dis-
arming the alarm control panel or when entering or exiting the Installer Mode.
Therefore, in version 2 of Extended SIA3, the "/" text separator has been replaced by a "|" text separator.
For example, the string will change from:
#000010|Nti10:15/ri4/FA2/AFire Zone 2
to:
#000010|Nti10:15|ri4|FA2|AFire Zone 2
If you are having problems with incorrect"power failure" messages, try this extended SIA3 V2 option.
Note about Extended SIA3 V3:
Some S/W versions that work in the SIA recipients do not always recognise the "/" text separator. This may cause
problems.
Therefore, in version 3 of Extended SIA3, the "/" text separator has been replaced by a "^" text separator in two posi-
tions.
For example, the string will change from:
#000010|Nti10:15/ri4/FA2/AFire Zone 2
to:
#000010|Nti10:15/ri4/FA2^AFire Zone 2^