Abus SECVEST FUAA50 Series, Installer Manual

Page: 51 / 327

Configuration
51
Partitions to be monitored when trigger events occur.
IP address IP address of the camera in the internal network
HTTP Port Internal HTTP port of the camera in the internal network (default setting: "80")
RTSP Port Internal
RTSP port of the camera in the internal network (default setting: “554”)
HTTP Port External External HTTP port for which port forwarding in the router is configured
RTSP Port External External RTSP port for which port forwarding in the router is configured
User name Default "Root" setting, no user name is assigned from S/W 1.01.00 onwards
Password Default setting
– no password assigned
Apply the settings with the "Submit" button.
Assigning a zone name
Note
It is useful to assign unique zone names so that if
a fault occurs it is easier to identify the affected
detector.
Example: MD stands for motion detector, location:
office01, so detector name is
MD-office01
1. Click in the Name text field.
2. Delete the preset name (Zone 01).
3. Assign a unique name for the zone with max. 12
characters.
4. Confirm the new name once the configuration is
complete by selecting Submit .
Selecting the zone type
Note
The preset zone type can be changed here.
Note the description of the zone types in this sec-
tion.
A zone is a detector that is taught into the wire-
less alarm panel .
Zones can have different attributes.
The detector does not know whether the wireless
alarm panel is armed or disarmed.
For this reason, detectors always send an alarm
to the alarm panel if they register a change.
The alarm is only then analysed in the wireless
alarm panel to determine whether the notification
triggers an alarm response or not.