Abus SECVEST FUAA50 Series, Installer Manual

Page: 143 / 327

Configuration
143
Name/function Explanation
Checking for an upgrade? After pressing "Select", the alarm panel automatically asks the ABUS FTP server:
"Is new software available?"
If the FTP server replies to this question with a "Yes", the following note appears:
"Upgrade available".
If the FTP server replies to this question with a "No", the following note appears:
"Upgrade not available".
Upgrade available
If you would like to continue with the panel upgrade now, press OK.
Wait until the panel accesses the language files
Do not press "OK"
Wait until the panel accesses the application file
Do not press "OK"
Note
These files are stored on the SD card.
Now reboot
The alarm panel installs the new files from the SD card and performs a reboot.
Important
SW >= 3.00.06, saving and restoring the configuration
Before the alarm panel starts the upgrade, the configuration files and the SSL certificate are saved automatically on
the internal flash drive. The new software is then installed, and the alarm panel restarted. At this point, the factory set-
tings are used first, but the alarm panel then automatically reproduces the configuration files and the SSL certificate
from the flash drive (as if the configuration had been saved/reproduced manually). This means that the Start wizard is
not used and the SSL certificate is not regenerated.