Abus SECVEST FUAA50 Series, Installer Manual

Page: 223 / 327

Configuration
223
Role Meaning
Voice dialler Speech Dialler must be activated.
Installer Mode->Communications->Speech Dialler->Call Mode->Enabled
A list of the available connected transmission paths can be seen:
Ethernet

Once this has been selected, enter a valid SIP User ID.

e.g. +498207123456789@sipgate.de

Press the "OK" button.

The alarm panel establishes a connection. If the call is answered by this recipient, the re-
cipient hears the "Home Message" and "Message 1" to "Message 4".
S/W >=2.00.00

When this is selected, the configured recipients are displayed with their contact names as
stored in the phone book.

Scroll to the desired contact. Press the "Select” or “Start” key in the web interface.

The alarm panel sends a test call to this recipient.
PSTN

When this is selected, enter a number to dial.

Press the "OK" button.

The alarm panel establishes a connection. If the call is answered by this recipient, the re-
cipient hears the "Home Message" and "Message 1" to "Message 4".
S/W >=2.00.00

When this is selected, the configured recipients are displayed with their contact names as
stored in the phone book.

Scroll to the desired contact. Press the "Select” or “Start” key in the web interface.

The alarm panel sends a test call to this recipient.
GSM / Mobile

When this is selected, enter a number to dial.

Press the "OK" button.

The alarm panel establishes a connection. If the call is answered by this recipient, the re-
cipient hears the "Home Message" and "Message 1" to "Message 4".
S/W >=2.00.00

When this is selected, the configured recipients are displayed with their contact names as
stored in the phone book.

Scroll to the desired contact. Press the "Select” or “Start” key in the web interface.

The alarm panel sends a test call to this recipient.
If "Call Acknowledge" is activated:

The recipient can acknowledge and end the call with 5 or 9 respectively if the following is
set: Installer Mode->Communications->Speech Dialler->Call Acknowledge
->Enabled.

During the test call a series of progress messages appear on the display.
If the test call was not successful, the display shows a brief message with the cause of the
error.
SMS
Text messages must be activated and the contact must be saved in the phone book.
Installer Mode->Communications->SMS->Call Mode->Enabled
A list of the available connected transmission paths can be seen: