50 Settings, I/O and diagnostics on the control panel
Communication
setup
To set up communication between the drive and
the fieldbus master, define these settings and then
select
Apply settings to fieldbus module
.
Drive control setup
Sets how a fieldbus master can control this drive,
and how the drive reacts if the fieldbus
communication fails.
Received data from
master
Sets what the drive's fieldbus module expects to
receive from the fieldbus master (PLC). After
changing these settings, select
Apply settings to
fieldbus module
.
Send data to master Sets what the drive's fieldbus module sends to the
fieldbus master (PLC). After changing these
settings, select
Apply settings to fieldbus
module
.
Menu item
Description
Corresponding
parameter
ACS580 FW.book Page 50 Wednesday, September 21, 2016 9:48 PM