ABB ACS580 Series, Firmware Manual

Page: 161 / 462

Parameters 157
06.20 Constant speed
status word Constant speed/frequency status word. Indicates which
constant speed or frequency is active (if any). See also
parameter
06.19 Speed control status word , bit 7, and section
Constant speeds/frequencies (page 97 ).
This parameter is read-only.
-
0000h…FFFFh Constant speed/frequency status word. 1 = 1
06.21 Drive status word 3 Drive status word 3.
This parameter is read-only. -
0000h…FFFFh Drive status word 1. 1 = 1
0000h…FFFFh Start inhibit status word. 1 = 1
06.30 MSW bit 11
selection Selects a binary source whose status is transmitted as bit 11
(User bit 0) of
06.11 Main status word .
Ext ctrl loc
False 0. 0
True 1. 1
Ext ctrl loc Bit 11 of 06.01 Main control word (see page 154 ). 2
Other [bit] Source selection (see Terms and abbreviations on page 144 ). -
06.31 MSW bit 12
selection Selects a binary source whose status is transmitted as bit 12
(User bit 1) of
06.11 Main status word .
Ext run
enable
False 0. 0
True 1. 1
Ext run enable Status of the external run enable signal (see parameter 20.12
Run enable 1 source ).
2
Other [bit] Source selection (see Terms and abbreviations on page 144 ). -
No. Name/Value Description Def/FbEq16
Bit Name Description
0 Constant speed 1 1 = Constant speed or frequency 1 selected
1 Constant speed 2 1 = Constant speed or frequency 2 selected
2 Constant speed 3 1 = Constant speed or frequency 3 selected
3 Constant speed 4 1 = Constant speed or frequency 4 selected
4 Constant speed 5 1 = Constant speed or frequency 5 selected
5 Constant speed 6 1 = Constant speed or frequency 6 selected
6 Constant speed 7 1 = Constant speed or frequency 7 selected
7…15 Reserved
Bit Name Description
0 DC hold active 1 = DC hold is active
1 Post-magnetizing
active 1 = Post-magnetizing is active
2 Motor pre-heating
active 1 = Motor pre-heating is active
3 PM smooth start
active 1 = PM smooth start active
4…15 Reserved
ACS580 FW.book Page 157 Wednesday, September 21, 2016 9:48 PM