240 Parameters
Defines a minimum torque limit for the drive (in percent of
nominal motor torque). See diagram at parameter
.
The limit is effective when
• the source selected by
is 0, or
•
.
WARNING!
In torque control mode (vector motor
control) only.
-300.0%
-1600.0…0.0%
Minimum torque limit 1.
See par.
Defines a maximum torque limit for the drive (in percent of
nominal motor torque). See diagram at parameter
.
The limit is effective when
• the source selected by
is 0, or
•
.
WARNING!
In torque control mode (vector motor
control) only.
300.0%
0.0…1600.0%
Maximum torque 1.
See par.
Defines the source of the minimum torque limit for the drive
(in percent of nominal motor torque) when
• the source selected by parameter
is 1,
or
•
.
See diagram at
Note:
Any positive values received from the selected source
are inverted.
WARNING!
In torque control mode (vector motor
control) only.
Zero
None.
0
AI1 scaled
(see page
).
1
AI2 scaled
(see page
).
2
Reserved
3…14
PID
controller).
15
Minimum torque 2
.
16
Source selection (see
on page
). -
Defines the source of the maximum torque limit for the drive
(in percent of nominal motor torque) when
• the source selected by parameter
is 1,
or
•
See diagram at
Note:
Any negative values received from the selected source
are inverted.
WARNING!
In torque control mode (vector motor
control) only.
Zero
None.
0
AI1 scaled
(see page
).
1
AI2 scaled
(see page
).
2
No.
Name/Value
Description
Def/FbEq16
ACS580 FW.book Page 240 Wednesday, September 21, 2016 9:48 PM