![background image](http://html.mh-extra.com/html/abb/acs580-series/acs580-series_firmware-manual_2311022.webp)
18 Start-up, control with I/O and ID run
Direction test is optional, and requires rotating the
motor. Do not do this if it could cause any risk, or if
the mechanical set-up does not allow it.
To do the direction test, select
Spin the motor
and press
(
Next
).
Press the Start key
on the panel to start the
drive.
Check the direction of the motor.
If it is forward, select
Yes, motor is spinning
forward
and press
(
Next
) to continue.
If the direction is not forward, select
No, fix
direction
and press
(
Next
) to continue.
If you want to make a backup of the settings made
so far, select
Backup
and press
(
Next
).
If you do not want to make a backup, select
Not
now
and press
(
Next
).
Forward direction
Reverse direction
ACS580 FW.book Page 18 Wednesday, September 21, 2016 9:48 PM