![background image](http://html.mh-extra.com/html/abb/acs580-series/acs580-series_firmware-manual_2311407.webp)
Fieldbus control through the embedded fieldbus interface (EFB) 403
Selects fieldbus as the source for the start
and stop commands when EXT2 is selected
as the active control location.
SPEED REFERENCE SELECTION
Selects a reference received through the
embedded fieldbus interface as speed
reference 1.
Selects a reference received through the
embedded fieldbus interface as speed
reference 2.
TORQUE REFERENCE SELECTION
Selects a reference received through the
embedded fieldbus interface as torque
reference 1.
Selects a reference received through the
embedded fieldbus interface as torque
reference 2.
FREQUENCY REFERENCE SELECTION
Selects a reference received through the
embedded fieldbus interface as frequency
reference 1.
Selects a reference received through the
embedded fieldbus interface as frequency
reference 2.
OTHER SELECTIONS
EFB references can be selected as the source at virtually any signal selector parameter by
selecting
, then either
SYSTEM CONTROL INPUTS
(reverts to
)
Saves parameter value changes (including
those made through fieldbus control) to
permanent memory.
Parameter
Setting for
fieldbus control
Function/Information
ACS580 FW.book Page 403 Wednesday, September 21, 2016 9:48 PM