VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
94
SNMP SETTINGS
Steps:
1).
Opening the
Setup Tab>Network Configuration
drop-down menu and clicking the
SNMP
link
will open the network
SNMP
settings page.
Figure 7-58
: Setup Tab –Network Configuration Menu – SNMP Settings
NOTE:
SNMP (Simple Network Management Protocol)
is an Internet-standard protocol for collecting and
organizing information about managed devices on IP networks and for modifying that information to
change device behavior.
2).
From the SNMP settings page, a user may
Enable
SNMP and configure the following related
settings:
SNMP Setting Category Description
SMNP Version
Select the SMNP version to use with the camera.
SMNP Description
Configure SMNP
Location
and
Contact
description information.
VACM Setting
Configure the
View-based Access Control Model Read Community
.
The camera default settings is
public (read-only). Private (read-write)
can also be used.
Trap Setting
Define an
Address
and
Community
for Trap Ver 1.0 and 2.0.
3).
Click
Apply
to save SNMP settings changes.
