VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
54
IPv6 Setting
Description
Enable Accept Router
Advertisements
Enable Accept Router Advertisements
will allow the camera to accept
router advertisements, signaling device availability and connectivity to
the host router.
Enable DHCP
Enable DHCP
for automatic IP address assignment. Select a
DHCP Type
from the drop-down menu.
IP Address
The device IP address. If DHCP is not enabled, the user may assign an
address.
Prefix Length
Assign an address prefix length.
Default Router
Enter the default router address
DATE & TIME
Steps:
1).
Opening the
Setup Tab>Basic Configuration
drop-down menu and clicking the
Date & Time
link will open the
Date & Time
settings page.
Figure 7-7
: Setup Tab – Basic Configuration Menu – Date & Time Settings
2).
From the
Date & Time
settings
page, a user may edit a camera’
s
time settings including time
zone, time server, date and time forma
t
and time synchronization source.
