VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
89
MULTICAST
Figure 7-52
: Setup Tab –Network Configuration Menu – RTSP/RTP Settings –Multicast Configuration
Steps:
1).
Under the
Multicast
section of the
RTSP
settings page, a user may enable and configure
Multicast
settings for the camera’s
First
(Main) and
Second
(Sub) streams. Before configuring,
make sure the desired stream tab has been selected (above the
Unicast
section header).
Configurable settings include:
Multicast Setting
Description
Enable Always
Multicast
Enabling this option will have the selected stream use UDP multicast indefinitely
for RTSP streaming.
Video IP Address/Port
Enter a static address (or leave blank for auto configuration) for broadcast of
UDP Multicast video.
Meta IP Address/Port
Enter a static address (or leave blank for auto configuration) for broadcast of
UDP Multicast meta data.
ONVIF Meta IP
Address/Port
Enter a static address (or leave blank for auto configuration) for broadcast of
UDP Multicast ONVIF meta data.
TTL
Set the TTL threshold.
The TTL threshold is a time value which delineates how long a data packet can
exist across an information network (local intranet, internet, etc…) before
becoming invalidated. Approximation of TTL threshold value effects are listed
below:
0
- Restricted to the same host. Won't be output by any interface.
1
- Restricted to the same subnet. Won't be forwarded by a router.
<32
- Restricted to the same site, organization or department.
<64
- Restricted to the same region.
<128
- Restricted to the same continent.
<255
- Unrestricted in scope; Global.
Name
Name the multicast stream.
Enable QoS DSCP
Enable Quality of Service differentiated services.
Video / Meta / ONVIF
Meta DSCP
Assign DSCP levels for
Video, Meta and ONVIF
Meta. Low-latency services will be
dedicated starting with components featuring the highest DSCP value.
