VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
27
VIGIL SERVER CONFIGURATION – NETWORK CAMERA SETTINGS
The
Network Camera Settings
window is where the direct configuration of the 3xLOGIC All-in-One
camera will take place.
Steps:
1).
Fill in all the required information and press
OK
.
2).
After the
Network Camera Settings
window closes,
click
OK
or
Apply
to save the settings in VIGIL Server.
VIGIL Server is able to receive video from one or many network
cameras connected to the LAN or WAN. VIGIL Server currently
supports several types of network cameras aside from 3xLOGIC
All-in-One Cameras.
To edit a network camera at any time after initial configuration:
Steps:
1).
Access
VIGIL Server Settings>Camera Setup Tab
, select
the desired network camera and click the Network
Camera
Settings
button. This will open the
Network
Camera Settings
window.
NOTE:
The Network Camera feature disables the physical camera input
on video capture cards for the selected camera channel.
Field
Description
Type
The type of network camera.
Address
The IP or HTTP address of the camera. It is not necessary to include http:// at
the beginning of the HTTP address.
Web/Camera
Settings
Connects to the camera’s web interface to make changes to the camera’s
internal settings.
Data / RTSP Port
The network ports used to connect with the camera.
Camera Number
Some Network Camera types also support Encoders. Select the Camera number
on the encoder to use for this network camera.
URL
Set this to the camera URL, if applicable. For 3xLOGIC All-in-One cameras, the url
will be automatically set to
rtsp:// [ip address] /ch0_unicasy_firststream
Stream Type
Select the video stream type for the camera: MPEG4, JPEG, or H264.
Timeout
The number of seconds to attempt to connect to the camera before timing out.
If the timeout is reached, “Signal Loss” displays in the
Live Viewer
window.
User/Password
The user name and password to connect to the camera. The default values are
automatically entered.
Figure 4-17:
Network Camera Settings
Window
