
VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
74
HEART BEAT
Steps:
1).
Opening the
Setup Tab>Event Configuration
drop-down menu and clicking the
Heart Beat
link
will open the
Heart Beat
settings page.
Figure 7-33
: Setup Tab – Event Configuration Menu – Heart Beat Settings
2).
In network and computer science, a
Heart Beat
is a periodic signal generated by hardware (or
software) to indicate normal operation.
3).
Check off
Enable
to activate a heartbeat signal from the camera.
After enabling, a user may configure the following options:
Stream Setting
Description
Interval
Configure the time interval between heart beat signal broadcasts.
TCP Server
Enable a heartbeat signal broadcast via TCP Event Server.
TCP Notification
Enable a heartbeat signal broadcast via TCP Notification.
Multicast
Enable a heartbeat signal broadcast via UDP Multicast.
4).
Click
Apply
to save
Heart Beat
settings changes.
SCHEDULE
Steps:
1).
Opening the
Setup Tab>Event Configuration
drop-down menu and clicking the
Schedule
link
will open the
Schedule
settings page.
Figure 7-34
: Setup Tab – Event Configuration Menu – Schedule Settings
2).
From the
Schedule
settings page, a user may
Add
,
Modify
or
Remov
e
an event schedule.
When associated with a schedule, an event will trigger only during the specified time range.
3).
Select a schedule from the list to display Schedule information.
4).
To remove a schedule, select the desired schedule from the list and click
Remove
.